Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor-Liquid Equilibria in the Propyl Acetate + Ethanoic Acid Binary System from (323.15 to 353.15) K: Measurement with a Static Method and Modeling with the NRTL, Wilson, UNIQUAC, and COSMO-SAC Approaches

Fan, D.[Dongfu], Li, J.[Jinlong], Shi, J.[Jibin], Peng, C.[Changjun], Liu, H.[Honglai], Hu, Y.[Ying], Paricaud, P.[Patrice]
J. Chem. Eng. Data 2011, 56, 4, 1323-1329
ABSTRACT
A static total pressure method was employed to determine the vapor pressures of pure propyl ethanoate (propyl acetate), pure ethanoic acid, and the corresponding propyl acetate + ethanoic acid binary system at different feeding compositions over the temperature range (323.15 to 353.15) K. The isothermal vapor-liquid equilibrium (VLE) data of the binary mixture at various temperatures were obtained from classical thermodynamic relations and mass-balance equations. The nonrandom two-liquid (NRTL), Wilson, and universal quasi-chemical (UNIQUAC) models were used to represent the nonideality of the liquid phase, and a modified Peng-Robinson equation of state was used to compute the properties of the vapor phase. The overall average relative deviations between the experimental equilibrium pressures and the NRTL, Wilson, and UNIQUAC models were (0.95, 0.96, and 0.94) %, respectively. The three models gave about the same equilibrium pressures and vapor compositions. A new version of the conductor-like screening model-segment activity coefficient (COSMO-SAC) model was applied to predict the VLE of propyl acetate + ethanoic acid mixtures, and good agreement with the experimental data was obtained.
Compounds
# Formula Name
1 C2H4O2 acetic acid
2 C5H10O2 propyl ethanoate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:6
  • 4
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:6
  • 4
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:6
  • 52