Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Liquid-Liquid Equilibria Measurement of Systems Involving Alkanes (Heptane and Dodecane), Aromatics (Benzene or Toluene), and Furfural

Kumar, U. K. A., Mohan, R.[Ratan]
J. Chem. Eng. Data 2011, 56, 3, 485-490
ABSTRACT
Liquid-liquid equilibria (LLE) of alkane + aromatic + solvent systems is of interest in connection with the extraction of aromatics from petroleum fractions, for example, naphtha, distillates, lube oil, and so forth. Though the actual industrial systems contain a large number of compounds, LLE studies on a smaller number of representative compounds are also important in the development of theoretical/semiempirical LLE models for use in the design of extraction processes. In the present work LLE data has been experimentally obtained for the ternary systems heptane + benzene + furan-2-carbaldehyde (furfural) and heptane + methylbenzene (toluene) + furfural at two temperatures (298.15 and 303.15) K, and for the quaternary systems heptane + dodecane + benzene or toluene + furfural at 298.15 K. The data are seen to be correlated excellently by the nonrandom two-liquid model. The model parameters were determined by data regression using the Nelder-Mead optimization technique. The model also enabled tie line calculations between the last experimental tie line and the plait point, thereby giving the shape of the full two-phase region.
Compounds
# Formula Name
1 C7H16 heptane
2 C6H6 benzene
3 C7H8 toluene
4 C5H4O2 2-furaldehyde
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 4
  • 1
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 1 ; Liquid mixture 2
  • Mole fraction - 2 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • Chromatography
  • Chromatography
  • 12
  • POMD
  • 4
  • 3
  • 1
  • Mole fraction - 1 ; Liquid mixture 1
  • Mole fraction - 1 ; Liquid mixture 2
  • Mole fraction - 3 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Mole fraction - 3; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • Chromatography
  • Chromatography
  • 11