Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Volumetric Properties for (Ionic Liquid + Methanol or Ethanol or 1-Propanol + Nitromethane) at 298.15 K and Atmospheric Pressure

Deenadayalu, N.[Nirmala], Bahadur, I.[Indra], Hofman, T.[Tadeusz]
J. Chem. Eng. Data 2011, 56, 4, 1682-1686
ABSTRACT
The densities of the ternary systems {1-butyl-3-methylimidazolium methyl sulfate ([BMIM]+[MeSO4]-) + methanol or ethanol or 1-propanol + nitromethane} were measured at the temperature 298.15 K, and the ternary excess molar volumes, V123E, were calculated . The V123E values are negative for all mole fractions of the ionic liquid (IL) and increase with increasing mole fraction of IL. The Cibulka equation was used to correlate the ternary excess molar volumes using the Redlich-Kister parameters for the binary systems obtained from the literature. There is a good correlation between the Cibulka equation and the experimental V123E data.
Compounds
# Formula Name
1 CH4O methanol
2 C2H6O ethanol
3 C3H8O propan-1-ol
4 CH3NO2 nitromethane
5 C9H18N2O4S 1-butyl-3-methylimidazolium methyl sulfate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • 4
  • 5
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 5; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 23
  • POMD
  • 2
  • 4
  • 5
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 5; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 23
  • POMD
  • 3
  • 4
  • 5
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 5; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 27