This paper reports P-p-T data for pure nitrogen measured with a high-pressure, single-sinker magnetic suspension densimeter (MSD) at (265, 293, 298.15, 350, and 400) K. The MSD yields data with less than 0.03 % estimated error over the pressure range of (10 to 200) MPa. A comparison of the experimental data to the equation of state (EoS) developed by Span et al. indicates they are consistent at pressures below 30 MPa. The EoS has a relative uncertainty with respect to density of 0.02 % over this range. At higher pressures, the density predictions of this model agree with the experimental data reported in this paper within a 0.05 % deviation band.
Compounds
#
Formula
Name
1
N2
nitrogen
Datasets
The table above is generated from the ThermoML associated json file (link above).
POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied;
the numbers refer to the table of compounds on the left.
Type
Compound-#
Property
Variable
Constraint
Phase
Method
#Points
POMD
1
Mass density, kg/m3 ; Fluid (supercritical or subcritical phases)
Temperature, K; Fluid (supercritical or subcritical phases)
Pressure, kPa; Fluid (supercritical or subcritical phases)