Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

PVTx Measurements of Water-n-Pentane Mixtures in Critical and Supercritical Regions

Rasulov, S. M.[Suleiman M.], Abdulagatov, I. M.[Ilmutdin M.]
J. Chem. Eng. Data 2010, 55, 9, 3247-3261
ABSTRACT
The PVTx properties of H2O + n-C5H12 mixtures have been measured in the near- and supercritical regions. Measurements were made along 66 liquid and vapor isochores in the density range from (63 to 713) kg*m-3, at temperatures from (303 to 684) K, and at pressures up to 63 MPa. Measurements were made for eight concentrations between 0.0270 and 0.8898 mole fractions of n-C5H12. The temperatures and pressures at the three-phase (liquid-liquid-gas) and two-phase (liquid-gas) boundary curves for the H2O + n-C5H12 mixtures were obtained using the isochoric (P-T) break point technique. The expanded uncertainty of the density, pressure, and temperature measurements at the 95 % confidence level with a coverage factor of k = 2 is estimated to be 0.12 % (at high densities) to 0.15 % (at low densities), (0.0005 to 0.03) MPa, and 15 mK, respectively. The critical property (PC,TC) data of the upper and lower branches of the critical curves were extracted from the derived phase-boundary data. The measured three-phase data were used to estimate the value of the upper critical end point. The value of the Krichevskii parameter was calculated from the direct measured PVTx and the derived critical property data.
Compounds
# Formula Name
1 C5H12 pentane
2 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Gas
  • Closed cell (Static) method
  • 5
  • POMD
  • 1
  • 2
  • Critical pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Direct measurement
  • 6
  • POMD
  • 1
  • 2
  • Critical temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Derived from PVT data
  • 6
  • POMD
  • 1
  • 2
  • Critical temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Derived from PVT data
  • 6
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 48