Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility and Phase Diagram for the Ternary Sodium Oxalate + Hydrogen Peroxide + Water System at (283.15 and 293.15) K

Zhao, H.-k.[Hong-kun], Zhang, D.-S.[Dao-Sen], Tang, C.[Cao], Li, R.-R.[Rong-Rong], Su, M.-L.[Ming-Li], Xu, W.-L.[Wen-Lin], Wang, Y.-Q.[Ya-Qiong]
J. Chem. Eng. Data 2007, 52, 3, 863-865
ABSTRACT
In this investigation, the mutual solubilities for the ternary Na2C2O4 + H2O2 + H2O system were determined at (283.15 and 293.15) K. The phase diagrams of the system were constructed based on the measured solubility. The compound Na2C2O4*H2O2 was confirmed by Schreinemaker's wet residue method. In addition, the density of the system was obtained. At (283.15 and 293.15) K, two solid phases were formed in the ternary Na2C2O4 + H2O2 + H2O system, which corresponded to Na2C2O4 and Na2C2O4*H2O2. The phase diagrams of the ternary system were similar at different temperatures; the solubilities of Na2C2O4 and Na2C2O4*H2O2 in water increased slightly with increasing temperature. The crystalline region of the compound Na2C2O4*H2O2 decreased as the temperature increased, the temperature having little effect on the yield of Na2C2O4*H2O2.
Compounds
# Formula Name
1 C2Na2O4 sodium oxalate
2 H2O2 hydrogen peroxide
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • PYCNOM:UFactor:32
  • 9
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • PYCNOM:UFactor:32
  • 19
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Titration method
  • 9
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 19
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • PYCNOM:UFactor:32
  • 2
  • POMD
  • 1
  • 3
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 2