Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor-Liquid Equilibrium for Binary System of Diethyl Sulfide + n-Hexane at (338.15 and 323.15) K and Diethyl Sulfide + 1-Hexene at (333.15 and 323.15) K

Sapei, E.[Erlin], Zaytseva, A.[Anna], Uusi-Kyyny, P.[Petri], Keskinen, K. I.[Kari I.], Aittamaa, J.[Juhani]
J. Chem. Eng. Data 2007, 52, 2, 571-576
ABSTRACT
Isothermal vapor-liquid equilibrium (VLE) for diethyl sulfide + n-hexane at (338.15 and 323.15) K and diethyl sulfide + 1-hexene at (333.15 and 323.15) K were measured with a circulation still. All systems exhibit a slight positive deviation from ideality. No azeotropic behavior was found in any of the systems studied. The experimental results were correlated with the Wilson model and also compared with the original UNIFAC and the COSMORS predictive models. The measured diethyl sulfide + n-hexane VLE have been used simultaneously with the excess enthalpy from literature for a correlation of temperature-dependent Wilson parameters. Excess molar enthalpies at 318.15 K for the diethyl sulfide + 1-hexene system were calculated from the VLE data. Analyses of liquid- and vapor-phase compositions were determined with gas chromatography. All VLE measurements passed the thermodynamic consistency tests that were used (integral, infinite dilution, and point test).
Compounds
# Formula Name
1 C6H14 hexane
2 C6H12 hex-1-ene
3 C7H8 toluene
4 C4H10S 3-thiapentane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 3
  • POMD
  • 1
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 36
  • POMD
  • 1
  • 4
  • Mole fraction - 4 ; Gas
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 36
  • POMD
  • 4
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 34
  • POMD
  • 4
  • 2
  • Mole fraction - 4 ; Gas
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 34