Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Phase Equilibria Involved in Extractive Distillation of Dipropyl Ether + 1-Propyl Alcohol Using N,N-Dimethylformamide as Entrainer

Lladosa, E., Monton, J. B. [Juan B.], Burguet, M. C.[M. Cruz], Munoz, R.[Rosa]
J. Chem. Eng. Data 2007, 52, 2, 532-537
ABSTRACT
Consistent vapor-liquid equilibrium data for the binary and ternary systems dipropyl ether (1) + 1-propyl alcohol (2) + N,N-dimethylformamide (3) are reported at 101.3 kPa. The results indicate that dipropyl ether (1) + N,Ndimethylformamide (3) system exhibits a positive deviation from ideal behavior and that 1-propyl alcohol (2) + N,N-dimethylformamide (3) system deviates negatively from ideality. The activity coefficients of the solutions were correlated by the Wilson, NRTL, and UNIQUAC models. It is shown that these models allow a very good prediction of the phase equilibrium of the ternary system using the pertinent parameters of the binary systems. In addition, the Wisniak-Tamir relations were used for correlating bubble-point temperatures.
Compounds
# Formula Name
1 C3H8O propan-1-ol
2 C6H14O dipropyl ether
3 C3H7NO dimethylformamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:6
  • 1
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 1
  • POMD
  • 3
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 23
  • POMD
  • 3
  • 2
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 23
  • POMD
  • 3
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 21
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 21
  • POMD
  • 3
  • 1
  • 2
  • Mole fraction - 1 ; Liquid
  • Mole fraction - 1 ; Gas
  • Mole fraction - 2 ; Gas
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Chromatography
  • Chromatography
  • Chromatography
  • 42