ABSTRACT

The equilibrium physical property data (densities, viscosities, refractive index, interfacial tensions, and contact angles) for the liquid-liquid system isopropyl alcohol + cyclohexene + water have been determined at 294 K. The phase diagram and equilibrium tie lines were evaluated. The compositions of the coexistence curve were determined through the refractive index, densities were determined by an electronic oscillating U-tube densitometer, viscosities were determined by a U-tube viscometer, surface/interfacial tensions were determined by a du Nouy ring and a spinning drop method, and contact angles were determined with a goniometer contact angle meter.

Compounds

#	Formula	Name
1	C3H8O	propan-2-ol
2	C6H10	cyclohexene
3	H2O	water

Datasets

The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type	Compound-#	Property	Variable	Constraint	Phase	Method	#Points
POMD	1 2 3	Interfacial tension, N/m ; Liquid mixture 1	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 1 Temperature, K; Liquid mixture 1	Liquid mixture 1 Liquid mixture 2	Ring tensiometer	6
POMD	1 2 3	Surface tension liquid-gas, N/m ; Liquid mixture 2	Volume fraction - 1; Liquid mixture 2	Pressure, kPa; Liquid mixture 2 Temperature, K; Liquid mixture 2	Liquid mixture 2 Air at 1 atmosphere	Ring tensiometer	6
POMD	1 2 3	Viscosity, Pa*s ; Liquid mixture 1	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 1 Temperature, K; Liquid mixture 1	Liquid mixture 1 Liquid mixture 2	Capillary tube (Ostwald; Ubbelohde) method	7
POMD	1 2 3	Viscosity, Pa*s ; Liquid mixture 2	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 2 Temperature, K; Liquid mixture 2	Liquid mixture 2 Liquid mixture 1	Capillary tube (Ostwald; Ubbelohde) method	6
POMD	1 2 3	Refractive index (Na D-line) ; Liquid mixture 1	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 1 Temperature, K; Liquid mixture 1	Liquid mixture 1 Liquid mixture 2	Standard Abbe refractometry	6
POMD	1 2 3	Refractive index (Na D-line) ; Liquid mixture 2	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 2 Temperature, K; Liquid mixture 2	Liquid mixture 2 Liquid mixture 1	Standard Abbe refractometry	5
POMD	1 2 3	Volume fraction - 1 ; Liquid mixture 2	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 2 Temperature, K; Liquid mixture 2	Liquid mixture 2 Liquid mixture 1	refractive index	7
POMD	1 2 3	Volume fraction - 3 ; Liquid mixture 1	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 1 Temperature, K; Liquid mixture 1	Liquid mixture 1 Liquid mixture 2	refractive index	6
POMD	1 2 3	Volume fraction - 3 ; Liquid mixture 2	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 2 Temperature, K; Liquid mixture 2	Liquid mixture 2 Liquid mixture 1	refractive index	6
POMD	1 2 3	Mass density, kg/m3 ; Liquid mixture 1	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 1 Temperature, K; Liquid mixture 1	Liquid mixture 1 Liquid mixture 2	Vibrating tube method	7
POMD	1 2 3	Mass density, kg/m3 ; Liquid mixture 2	Volume fraction - 1; Liquid mixture 1	Pressure, kPa; Liquid mixture 2 Temperature, K; Liquid mixture 2	Liquid mixture 2 Liquid mixture 1	Vibrating tube method	6

Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Physical Properties (Density, Viscosity, Surface Tension, Interfacial Tension, and Contact Angle) of the System Isopropyl Alcohol + Cyclohexene + Water

Al-Wahaibi, Y. M.[Yahya M.], Grattoni, C. A.[Carlos A.], Muggeridge, A. H.[Ann H.]

ABSTRACT