Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Thermodynamics of Mixing Tetrahydropyran with 1-Alkanols and Excess Enthalpies of Homomorphy-Related Systems

Miranda, Y.[Yuritzia], Pineiro, A.[Angel], Brocos, P.[Pilar]
J. Chem. Eng. Data 2007, 52, 2, 429-437
ABSTRACT
Densities (F) and volumetric heat capacities (Cp/V) have been measured at 298.15 K over the whole mole fraction range for the binary mixtures {tetrahydropyran + 1-propanol, + 1-butanol, + 1-pentanol, + 1-hexanol, + 1-heptanol, + 1-octanol, + 1-nonanol, or + 1-decanol}. From experimental data, the excess molar isobaric heat capacities (Cp E) were calculated. Excess molar volumes (VE) are reported for the systems containing 1-propanol, 1-butanol, 1-pentanol, and 1-decanol. In order to assess and compare the different degrees of hetero-association in these mixtures, the corresponding negative enthalpic contributions at equimolar fraction (Hint) have been calculated semiquantitatively by using the apolar homomorph concept. With this aim, excess molar enthalpies (HE) of {tetrahydropyran + 1-pentanol, + 1-nonanol, or + 1-decanol}, {tetrahydropyran + decane}, and {cyclohexane + 1-pentanol, + 1-heptanol, + 1-nonanol, or + 1-decanol} have been measured at 298.15 K. The results are discussed in terms of molecular interactions. The various steps of W-shape concentration dependence found in the Cp E point to the occurrence of local nonrandomness in THP + alkanol mixtures.
Compounds
# Formula Name
1 C5H10O tetrahydropyran
2 C10H22 decane
3 C3H8O propan-1-ol
4 C4H10O butan-1-ol
5 C5H12O pentan-1-ol
6 C6H14O hexan-1-ol
7 C7H16O heptan-1-ol
8 C8H18O octan-1-ol
9 C9H20O nonan-1-ol
10 C10H22O decan-1-ol
11 C6H12 cyclohexane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 1
  • POMD
  • 2
  • 1
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 9
  • POMD
  • 5
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 11
  • POMD
  • 5
  • 1
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 9
  • POMD
  • 5
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11
  • POMD
  • 1
  • 9
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 9
  • POMD
  • 1
  • 9
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 9
  • POMD
  • 1
  • 9
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 9
  • POMD
  • 10
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 9
  • POMD
  • 10
  • 1
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 9
  • POMD
  • 10
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 9
  • POMD
  • 5
  • 11
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 11; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 9
  • POMD
  • 11
  • 7
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 11; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 10
  • POMD
  • 11
  • 9
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 11; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 9
  • POMD
  • 11
  • 10
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 11; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 9
  • POMD
  • 3
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 9
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 9
  • POMD
  • 4
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 11
  • POMD
  • 4
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11
  • POMD
  • 7
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 11
  • POMD
  • 7
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11
  • POMD
  • 6
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 11
  • POMD
  • 6
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11
  • POMD
  • 8
  • 1
  • Heat capacity at constant pressure per volume, J/K/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 11
  • POMD
  • 8
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11