Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

High-Pressure Phase Behavior for Pentyl Acrylate and Pentyl Methacrylate in Supercritical Carbon Dioxide

Byun, H. S.[Hun Soo], Lee, H.-Y.[Ha-Yeon]
J. Chem. Eng. Data 2006, 51, 4, 1436-1440
ABSTRACT
High-pressure phase behavior is obtained for CO2 + pentyl acrylate systems at (313.15, 333.15, 353.15, 373.15, and 393.15) K and pressures up to 16.8 MPa and for CO2 + pentyl methacrylate systems at (313.15, 333.15, 353.15, 373.15, and 393.15) K and pressures up to 17.4 MPa. The solubility of monomers for the CO2 + pentyl acrylate and CO2 + pentyl methacrylate systems increase as the temperature increases at constant pressure. The CO2 + pentyl acrylate and CO2 + pentyl methacrylate systems exhibit type-I phase behavior. The experimental results for CO2 + pentyl acrylate and CO2 + pentyl methacrylate systems were correlated with the Peng-Robinson equation of state using a van der Waals one-fluid mixing rule including two adjustable parameters. A good fit of the data was obtained with the Peng-Robinson equation for CO2 + pentyl acrylate and CO2 + pentyl methacrylate systems. Critical constants (Pc, Tc, and o) were predicted with the Joback method and the Lee-Kesler method.
Compounds
# Formula Name
1 C8H14O2 pentyl 2-propenoate
2 C9H16O2 2-propenoic acid, 2-methyl-, pentyl ester
3 CO2 carbon dioxide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • 1
  • Critical pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Direct measurement
  • 3
  • POMD
  • 3
  • 1
  • Critical temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Visual observation in a stirred cell
  • 3
  • POMD
  • 3
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:16
  • 64
  • POMD
  • 3
  • 1
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 1; Gas
  • Gas
  • Liquid
  • CCELL:UFactor:16
  • 3
  • POMD
  • 3
  • 2
  • Critical pressure, kPa ; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Direct measurement
  • 2
  • POMD
  • 3
  • 2
  • Critical temperature, K ; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Visual observation in a stirred cell
  • 2
  • POMD
  • 3
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 2; Gas
  • Gas
  • Liquid
  • CCELL:UFactor:16
  • 2
  • POMD
  • 3
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:16
  • 51