Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Excess Molar Enthalpies of 1,2-Propanediol + Alkan-1-ols (C1-C6) and Their Correlations at 298.15 K and Ambient Pressure (81.5 kPa)

Zarei, H. A.[Hossein A.]
J. Chem. Eng. Data 2006, 51, 5, 1597-1601
ABSTRACT
Excess molar enthalpies, Hm E , of 1,2-propanediol + methanol, + ethanol, + propan-1-ol, + butan-1-ol, + pentan- 1-ol, and + hexan-1-ol have been measured over the entire range of composition at 298.15 K and ambient pressure (81.5 kPa) using a Parr 1455 solution calorimeter. From the experimental results, the excess partial molar enthalpies, Hi E, and excess partial molar enthalpies at infinite dilution, Hi E,yen, were calculated. While the excess molar enthalpies are negative for the methanol mixture, those for the ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, and hexan-1-ol mixtures are positive over the entire range of composition of 1,2-propanediol. The Hm E values increase as the chain length of the alkan-1-ol is increased. The experimental data were correlated by the Redlich-Kister equation and the two thermodynamics models (Wilson and NRTL).
Compounds
# Formula Name
1 C3H8O2 1,2-propanediol
2 CH4O methanol
3 C2H6O ethanol
4 C3H8O propan-1-ol
5 C4H10O butan-1-ol
6 C5H12O pentan-1-ol
7 C6H14O hexan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 1
  • POMD
  • 7
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 7
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:16
  • 1
  • POMD
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:4
  • 11
  • POMD
  • 1
  • 3
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:4
  • 10
  • POMD
  • 1
  • 4
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:4
  • 10
  • POMD
  • 1
  • 5
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:4
  • 10
  • POMD
  • 1
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:4
  • 10
  • POMD
  • 1
  • 7
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • FLOW:UFactor:4
  • 10