Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Densities, Viscosities, and Refractive Indices for Binary and Ternary Mixtures of N,N-Dimethylacetamide (1) + 2-Methylbutan-2-ol (2) + Ethyl Acetate (3) at 298.15 K for the Liquid Region and at Ambient Pressure

Iloukhani, H., Khanlarzadeh, K.
J. Chem. Eng. Data 2006, 51, 4, 1226-1231
ABSTRACT
Densities, viscosities, and refractive indices of the ternary system N,N-dimethylacetamide (1) + 2-methylbutan- 2-ol (2) + ethyl acetate (3) at T ) 298.15 K and the binary systems N,N-dimethylacetamide (1) + 2-methylbutan- 2-ol (2), N,N-dimethylacetamide (1) + ethyl acetate (3), and 2-methylbutan-2-ol (2) + ethyl acetate (3) were measured at T ) 298.15 K for the liquid region and at ambient pressure for the whole composition range. Excess molar volumes (VE), deviations in the viscosity (centse) from the mole fraction average, and deviations in the refractive index (centsnD) from the volume fraction average for the mixtures were derived from the experimental data. The binary and ternary data of V E, centse, and centsnD were correlated as a function of the mole fraction by using the Redlich-Kister and the Cibulka equations, respectively. The results are consistent with the self-association of alcohol and the polar and nonpolar characters of used ester and amide. McAlister s multibody and Kalidas- Laddha interaction model are used for correlating the kinematic viscosity of binary and ternary mixtures, respectively, with mole fraction. The experimental and the constituted binary and ternary systems are analyzed to discus the nature and strength of intermolecular interactions in these mixtures.
Compounds
# Formula Name
1 C4H9NO N,N-dimethylethanamide
2 C5H12O 2-methylbutan-2-ol
3 C4H8O2 ethyl acetate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE::UFactor:2
  • 1
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB::UFactor:2
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE::UFactor:2
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE::UFactor:2
  • 1
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB::UFactor:2
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 1
  • POMD
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 21
  • POMD
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • ABBE:UFactor:2
  • 21
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 21
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 16
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • ABBE:UFactor:2
  • 16
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 16
  • POMD
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 17
  • POMD
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • ABBE:UFactor:2
  • 17
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 17
  • POMD
  • 2
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 44
  • POMD
  • 2
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • ABBE:UFactor:2
  • 44
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 44