Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Density and Viscosity of Aqueous Blends of Three Alkanolamines: N-Methyldiethanolamine, Diethanolamine, and 2-Amino-2-methyl-1-propanol in the Range of (303 to 343) K

Rebolledo-Libreros, M. E.[Ma. Esther], Trejo, A.[Arturo]
J. Chem. Eng. Data 2006, 51, 2, 702-707
ABSTRACT
Experimental values of the density and viscosity for aqueous solutions of three alkanolamines composed of 32.5 mass % N-methyldiethanolamine (MDEA) and 12.5 mass % diethanolamine (DEA) with 2, 4, 6, 8, and 10 mass % 2-amino-2-methyl-1-propanol (AMP) have been determined in the temperature range of (303.15 to 343.15) K. The experimental results of the density and viscosity are given as a function of both temperature and AMP concentration. In the range of temperature studied, the experimental density values of the aqueous blends of alkanolamines decrease as the AMP concentration increases while the viscosity values increase as the AMP concentration increases. Correlation equations were obtained to allow the calculation of density and viscosity for aqueous solutions of MDEA and DEA as a function of AMP concentration and temperature.
Compounds
# Formula Name
1 C5H13NO2 N-methyldiethanolamine
2 C4H11NO2 diethanolamine
3 C4H11NO 2-amino-2-methylpropan-1-ol
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 3
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 3
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 3
  • POMD
  • 1
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass fraction - 1; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 4
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass fraction - 1; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 3
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass fraction - 2; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 3
  • POMD
  • 1
  • 2
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 4
  • POMD
  • 1
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 6