Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isobaric Vapor-Liquid Equilibria at 97.3 kPa and Excess Properties at (303.15, 308.15, and 313.15) K of Binary Mixture of p-Xylene + Decane

Kapoor, S.[Seema], Rattan, V. K.
J. Chem. Eng. Data 2005, 50, 6, 1891-1896
ABSTRACT
Isobaric vapor-liquid equilibrium data were obtained for the system p-xylene + decane at 97.3 kPa using a vapor recirculating type (modified Othmer s) equilibrium still. The activity coefficients were obtained by taking into consideration the vapor-phase nonideality. A comparison of values of activity coefficients obtained by experimental data was made with UNIFAC. The experimental data for the system were tested for thermodynamic consistency and correlated by various equations. Also the excess molar volumes, viscosities, and speeds of sound for the binary mixture at T ) (303.15, 308.15, and 313.15) K had been measured over the whole compositional range. The excess thermodynamic properties such as deviations in viscosity (centse) and excess isentropic compressibility (KS E) were calculated.
Compounds
# Formula Name
1 C8H10 1,4-dimethylbenzene
2 C10H22 decane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:32
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 3
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 3
  • POMD
  • 1
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Linear variable-path acoustic interferometer
  • 3
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:32
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 3
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 3
  • POMD
  • 2
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Linear variable-path acoustic interferometer
  • 3
  • POMD
  • 1
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:32
  • 20
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Index of refraction calibration data
  • 20
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 33
  • POMD
  • 1
  • 2
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Linear variable-path acoustic interferometer
  • 33
  • POMD
  • 1
  • 2
  • Excess molar volume, m3/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct dilatometry
  • 33