Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Temperature Dependence of Speed of Sound, Densities, and Isentropic Compressibilities of Hexane + Hexadecane, In the Range (293.15 to 373.15) K

Bolotnikov, M. F.[Mikhail F.], Neruchev, Yu. A., Melikhov, Yu. F., Verveyko, V. N.[Vyacheslav N.], Verveyko, M. V.[Marina V.]
J. Chem. Eng. Data 2005, 50, 3, 1095-1098
ABSTRACT
The speed of sound u and density for the binary mixture hexane + hexadecane has been measured as a function of composition and temperature along the saturation line between 293.15 K and 373.15 K. The speed of sound was measured by a pulse-phase echo ultrasonic device at a frequency of (1 to 5) MHz with an uncertainty of +-0.1%. The density was measured by an Ostwald-Sprengel-type pycnometer with an uncertainty of +-3 * 10-5 g*cm-3. The experimental results were used to calculate deviations of the speed of sound u, excess molar volume VE, and isentropic compressibility kS. The values u and VE were fitted by the Redlich-Kister equation.
Compounds
# Formula Name
1 C6H14 hexane
2 C16H34 hexadecane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • PULSEH:UFactor:4
  • 17
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Pycnometric method
  • 9
  • POMD
  • 2
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • PULSEH:UFactor:4
  • 17
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Pycnometric method
  • 17
  • POMD
  • 1
  • 2
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • PULSEH:UFactor:4
  • 153
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 81