Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Octanol/Water Partition Coefficient of Selected Herbicides: Determination Using Shake-Flask Method and Reversed-Phase High-Performance Liquid Chromatography

Paschke, A.[Albrecht], Neitzel, P. L.[Peter L.], Walther, W.[Wolfgang], Schuurmann, G.[Gerrit]
J. Chem. Eng. Data 2004, 49, 6, 1639-1642
ABSTRACT
For some triazines and phenylurea derivatives no reliable KOW values were available from literature. The log KOW values were determined directly with the shake-flask procedure and also indirectly using the reversed-phase high-performance liquid chromatography (RP-HPLC) method in the isocratic and gradient elution mode, respectively. Atrazine, as a well-investigated substance, and two herbicides of different chemical structures (acid amides) were included in this study. Both RP-HPLC methods yield log KOW values comparable among themselves and identical with the shake-flask results for methabenzthiazuron (2.5), chloroxuron (3.8), sebutylazine (3.2), and atrazine (2.6). For the atrazine metabolites investigated, the RP-HPLC-derived log KOW values are significantly less than those directly measured (1.0 for desethylatrazine and 1.5 for desisopropylatrazine). In contrast to these findings, considerably higher log KOW values were obtained for the two acid amides propachlor and metazachlor with both RP-HPLC methods compared to the shake-flask values (2.2 for both compounds). Because of the still complicated choice of reliable reference compounds/data for the RP-HPLC methods, the shake-flask technique should be preferred for determination of octanol/water partition coefficients with high accuracy in the range of log KOW < 4. Finally, the directly measured KOW values were compared with estimates obtained with two widely applied group-contribution methods (CLOGP and LOGKOW).
Compounds
# Formula Name
1 C14H16ClN3O 2-chloro-N-(2,6-dimethylphenyl)-N-(1H-pyrazol-1-ylmethyl)acetamide
2 C10H11N3OS methabenzthiazuron
3 C15H15ClN2O2 N'-[4-(4-chlorophenoxy)phenyl]-N,N-dimethylurea
4 C5H8ClN5 s-triazine, 2-amino-4-chloro-6-(ethylamino)-
5 C6H10ClN5 s-triazine, 2-amino-4-chloro-6-(isopropylamino)-
6 C9H16ClN5 6-chloro-N-ethyl-N'-(1-methylpropyl)-1,3,5-triazine-2,4-diamine
7 C8H14ClN5 6-chloro-N-ethyl-N'-(1-methylethyl)-1,3,5-triazine-2,4-diamine
8 H2O water
9 C8H18O octan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 9
  • 8
  • 2
  • Amount concentration (molarity), mol/dm3 - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Amount concentration (molarity), mol/dm3 - 2; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • OTHER
  • 1
  • POMD
  • 9
  • 3
  • 8
  • Amount concentration (molarity), mol/dm3 - 8 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Amount concentration (molarity), mol/dm3 - 3; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • OTHER
  • 1
  • POMD
  • 9
  • 4
  • 8
  • Amount concentration (molarity), mol/dm3 - 8 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Amount concentration (molarity), mol/dm3 - 4; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • OTHER
  • 1
  • POMD
  • 9
  • 5
  • 8
  • Amount concentration (molarity), mol/dm3 - 8 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Amount concentration (molarity), mol/dm3 - 5; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • OTHER
  • 1
  • POMD
  • 9
  • 6
  • 8
  • Amount concentration (molarity), mol/dm3 - 8 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Amount concentration (molarity), mol/dm3 - 6; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • OTHER
  • 1
  • POMD
  • 9
  • 7
  • 8
  • Amount concentration (molarity), mol/dm3 - 8 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Amount concentration (molarity), mol/dm3 - 7; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • OTHER
  • 1
  • POMD
  • 9
  • 8
  • 1
  • Amount concentration (molarity), mol/dm3 - 8 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Amount concentration (molarity), mol/dm3 - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • OTHER
  • 1