Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility, Density, Viscosity, Electrical Conductivity, and Refractive Index of Saturated Solutions of Lithium Hydroxide in Water + Ethanol

Taboada, M. E.[Maria Elisa], Veliz, D. M.[Daniza M.], Galleguillos, H. R.[Hector R.], Graber, T. A.[Teofilo A.]
J. Chem. Eng. Data 2005, 50, 1, 187-190
ABSTRACT
The solubilities, densities, refractive indices, electrical conductivities, and viscosities were determined for a constant ethanol/water mass ratio of 0.1 over the temperature range (288.15 to 308.15) K. Equations are given for these properties as a function of temperature. These properties are useful in the study of the crystallization of lithium hydroxide from aqueous solutions by means of the addition of ethanol.
Compounds
# Formula Name
1 HLiO lithium hydroxide
2 C2H6O ethanol
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Orion model 170 conductimeter
  • 15
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • CAPTUB:UFactor:4
  • 15
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Standard Abbe refractometry
  • 15
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • VIBTUB:UFactor:4
  • 15
  • POMD
  • 1
  • 3
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • salt concentrations were determined by chemical analysis
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass ratio of component to other component of binary solvent - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • CAPTUB:UFactor:4
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass ratio of component to other component of binary solvent - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Standard Abbe refractometry
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass ratio of component to other component of binary solvent - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • VIBTUB:UFactor:4
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass ratio of component to other component of binary solvent - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • salt concentrations were determined by chemical analysis
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass ratio of component to other component of binary solvent - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • f
  • 15