Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility of Valdecoxib in the Presence of Ethanol and Sodium Lauryl Sulfate at (298.15, 303.15, and 308.15) K

Liu, C.[Chengsheng], Desai, K. G. H.[Kashappa Goud H.], Liu, C.[Chenguang]
J. Chem. Eng. Data 2004, 49, 6, 1847-1850
ABSTRACT
This study investigated the solubilization of valdecoxib in aqueous solution using ethanol as a cosolvent and sodium lauryl sulfate as a surfactant at (298.15, 303.15, and 308.15) K. The analysis of valdecoxib is carried out by UV spectral measurements at a lambda(max) value of 201 nm. Preliminary investigations indicated both ethanol and sodium lauryl sulfate are respectively an effective cosolvent and surfactant for the solubilization of valdecoxib. The aqueous solubility of valdecoxib could be enhanced significantly by using ethanol as a cosolvent at various concentrations as well as by increasing the temperature of the dissolution media. The solubility of valdecoxib increased with increasing mass fraction of ethanol up to 80%, but solubility decreased in pure ethanol at all the temperatures. Experimental solubility data of valdecoxib were correlated with those calculated by a log-linear equation. Calculated Gibbs free energy values were all negative for all the ethanol + water mixtures at (298.15, 303.15, and 308.15) K, indicating the spontaneous nature of valdecoxib solubilization. In the case of sodium lauryl sulfate + water mixtures, the solubility of valdecoxib linearly increased with increasing mass fraction of sodium lauryl sulfate in water at all the temperatures.
Compounds
# Formula Name
1 H2O water
2 C16H14N2O3S valdecoxib
3 C12H25NaO4S sodium dodecyl sulfate
4 C2H6O ethanol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Mass concentration, kg/m3 - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • OTHER
  • 4
  • POMD
  • 4
  • 1
  • 2
  • Mass concentration, kg/m3 - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • OTHER
  • 18
  • POMD
  • 3
  • 1
  • 2
  • Mass concentration, kg/m3 - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • OTHER
  • 15
  • POMD
  • 4
  • 2
  • Mass concentration, kg/m3 - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • OTHER
  • 3