Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isochoric Heat Capacities of Alkanols and Their Aqueous Mixtures

Kitajima, H.[Hiroshi], Kagawa, N.[Noburo], Endo, H.[Harumi], Tsuruno, S.[Seizo], Magee, J. W.[Joseph W.]
J. Chem. Eng. Data 2003, 48, 6, 1583-1586
ABSTRACT
Isochoric heat capacities (Cv) of methanol, ethanol, and 1-propanol and binary mixtures of water with each of these alkanols were measured in the temperature range from 280 to 420 K and at pressures up to 30 MPa. The measurements were carried out on liquid-phase samples with a twin-cell type adiabatic calorimeter. Liquid densities were also reported in this work on the basis of the mass of the sample and the volume of the calorimetric cell. The experimental expanded uncertainty (with a coverage factor k = 2) of temperature measurements is ?13 mK, and that of pressure measurements is ?8 kPa. The expanded relative uncertainty for isochoric heat capacity is estimated to be ?2.2% for the liquid-phase measurements, and for density it is ?0.16%. The behavior of cv is anomolous, indicating that alkanol + water mixtures are strongly associated due to the influence of hydrogen bonds.
Compounds
# Formula Name
1 H2O water
2 CH4O methanol
3 C3H8O propan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • Molar heat capacity at constant volume, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vacuum adiabatic calorimetry
  • 112
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ISOCHOR
  • 112
  • POMD
  • 2
  • 1
  • Molar heat capacity at constant volume, J/K/mol ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vacuum adiabatic calorimetry
  • 345
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ISOCHOR
  • 401
  • POMD
  • 3
  • 1
  • Molar heat capacity at constant volume, J/K/mol ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vacuum adiabatic calorimetry
  • 380
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ISOCHOR
  • 380