Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Viscosities and Densities of Binary Mixtures of Hexane with 1-Chlorohexane between 293.15 K and 333.15 K

Bolotnikov, M. F.[Mikhail F.], Neruchev, Yu. A.
J. Chem. Eng. Data 2003, 48, 3, 739-741
ABSTRACT
The density and viscosity values of binary mixtures of hexane with 1-chlorohexane have been measured as a function of composition and temperatures between 293.15 K and 333.15 K. The estimated uncertainties are less than 11 W 10-4 g7cm-3 for density and 10.5% for viscosity. Viscosity deviations were fitted by the Redlich-Kister equation.
Compounds
# Formula Name
1 C6H14 hexane
2 C6H13Cl 1-chlorohexane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 9
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • PYCNOM:UFactor:4
  • 9
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 9
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • PYCNOM:UFactor:4
  • 9
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 81
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • PYCNOM:UFactor:4
  • 81