Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Limiting Activity Coefficients by Comparative Tensimetry: 1-Propanol and 1-Butanol in Heptane and in Octane

Vrbka, P.[Pavel], Dohnal, V.[Vladimir], Arlt, W.[Wolfgang]
J. Chem. Eng. Data 2004, 49, 4, 867-871
ABSTRACT
Limiting activity coefficients (y) of 1-propanol and 1-butanol in heptane and octane were determined at 10-K increments between 303 K and 343 K using a differential static cell equilibrium apparatus. The comparative tensimetric technique was employed because it is well suited for the systems and conditions examined. The new measurements supplement and extend previously released y1 data for some lower 1-alkanol in n-alkanes we determined by the inert gas stripping. The sets of data obtained by the two different experimental techniques show good mutual consistency. The present y1 data compare favorably also with other literature information, and their temperature trends are reasonably consistent with calorimetric data on limiting partial molar excess enthalpies.
Compounds
# Formula Name
1 C3H8O propan-1-ol
2 C4H10O butan-1-ol
3 C7H16 heptane
4 C8H18 octane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • 3
  • Activity coefficient - 1 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Static method
  • 5
  • POMD
  • 1
  • 4
  • Activity coefficient - 1 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Static method
  • 5
  • POMD
  • 2
  • 3
  • Activity coefficient - 2 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Static method
  • 5
  • POMD
  • 2
  • 4
  • Activity coefficient - 2 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Static method
  • 5