Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

High Pressure Phase Behavior of Carbon Dioxide + 1-Methyl-2-pyrrolidinone and Carbon Dioxide + 1-Ethyl-2-pyrrolidinone Systems

Lee, C.-W.[Chi-Woo], Jung, C.-Y.[Chan-Yeul], Byun, H. S.[Hun Soo]
J. Chem. Eng. Data 2004, 49, 1, 53-57
ABSTRACT
The high-pressure phase behavior of the carbon dioxide + 1-methyl-2-pyrrolidinone and carbon dioxide + 1-ethyl-2-pyrrolidinone systems has been studied. Pressure-composition isotherms were measured for binary mixtures of the carbon dioxide + 1-methyl-2-pyrrolidinone system at (45, 65, 85, 105, and 125) ?C and pressures up to 250 bar and for the carbon dioxide + 1-ethyl-2-pyrrolidinone system at (40, 60, 80, 100, and 120) ?C and pressures up to 232 bar. The solubility of 1-methyl-2-pyrrolidinone and 1-ethyl-2-pyrrolidinone for the carbon dioxide + 1-methyl-2-pyrrolidinone and carbon dioxide + 1-ethyl-2-pyrrolidinone systems increases as the temperatures increase at constant pressure. The carbon dioxide + 1-methyl-2-pyrrolidinone and carbon dioxide + 1-ethyl-2-pyrrolidinone systems exhibit type I phase behavior, characterized by a continuous critical line from pure carbon dioxide to the second component with a maximum in pressure. The experimental results for the carbon dioxide + 1-methyl-2-pyrrolidinone and carbon dioxide + 1-ethyl-2-pyrrolidinone systems have been modeled using the Peng-Robinson equation of state.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 C5H9NO N-methylpyrrolidone
3 C6H11NO 1-ethyl-2-pyrrolidinone
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Critical pressure, kPa ; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Direct measurement
  • 2
  • POMD
  • 1
  • 2
  • Critical temperature, K ; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Visual observation in an unstirred cell
  • 2
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:16
  • 61
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 2; Gas
  • Gas
  • Liquid
  • CCELL:UFactor:32
  • 12
  • POMD
  • 1
  • 3
  • Critical pressure, kPa ; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • Direct measurement
  • 2
  • POMD
  • 1
  • 3
  • Critical temperature, K ; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • Visual observation in an unstirred cell
  • 2
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:32
  • 47
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 3; Gas
  • Gas
  • Liquid
  • CCELL:UFactor:32
  • 11