Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Measurement and Estimation of Henry's Law Constants of Chlorinated Ethylenes in Aqueous Surfactant Solutions

Shimotori, T.[Tsutomu], Arnold, W. A.[William A.]
J. Chem. Eng. Data 2003, 48, 2, 253-261
ABSTRACT
Henry?s law constants of tetrachloroethylene, trichloroethylene, cis-dichloroethylene, and trans-dichloroethylene in air-aqueous surfactant systems were experimentally determined by the equilibrium partitioning in closed systems method. Polyoxyethylene (10) octylphenol, sodium dodecyl sulfate, and cetyltrimethylammonium bromide were used as surfactants. The effects of temperature and surfactant concentration were investigated, and the results demonstrated that the Henry?s law constants increased as temperature was increased and decreased as surfactant concentration was increased. The decrease in the Henry?s law constants became obvious above the critical micelle concentration. The effect of surfactant addition on the Henry?s law constant was larger for the more hydrophobic species. The micelle-water partitioning coefficients (Kmw) for the chlorinated ethylene-surfactant pairs were estimated from the Henry?s law constants. The values of Kmw estimated from the Henry?s law constants at high surfactant concentrations had a small standard error. On the basis of the experimental data, equations to estimate Henry?s law constants in air-aqueous surfactant systems as a function of temperature and surfactant concentration were constructed. All of the equations estimated the experimental data with R2 values above 0.96.
Compounds
# Formula Name
1 C12H25NaO4S sodium dodecyl sulfate
2 H2O water
3 C2Cl4 tetrachloroethene
4 C2HCl3 trichloroethene
5 C2H2Cl2 (E)-1,2-dichloroethene
6 C2H2Cl2 (Z)-1,2-dichloroethene
7 C19H42BrN N,N,N-trimethyl-1-hexadecanaminium bromide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • 2
  • Amount concentration (molarity), mol/dm3 ; Gas
  • Temperature, K; Gas
  • Amount concentration (molarity), mol/dm3 - 3; Liquid
  • Gas
  • Liquid
  • OTHER
  • 6
  • POMD
  • 4
  • 2
  • Amount concentration (molarity), mol/dm3 ; Gas
  • Temperature, K; Gas
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Gas
  • Liquid
  • OTHER
  • 6
  • POMD
  • 6
  • 2
  • Amount concentration (molarity), mol/dm3 ; Gas
  • Temperature, K; Gas
  • Amount concentration (molarity), mol/dm3 - 6; Liquid
  • Gas
  • Liquid
  • OTHER
  • 6
  • POMD
  • 5
  • 2
  • Amount concentration (molarity), mol/dm3 ; Gas
  • Temperature, K; Gas
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Gas
  • Liquid
  • OTHER
  • 6
  • POMD
  • 3
  • 1
  • 2
  • Amount concentration (molarity), mol/dm3 - 3 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 1; Liquid
  • Amount concentration (molarity), mol/dm3 - 3; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25
  • POMD
  • 4
  • 1
  • 2
  • Amount concentration (molarity), mol/dm3 - 4 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 1; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25
  • POMD
  • 1
  • 6
  • 2
  • Amount concentration (molarity), mol/dm3 - 6 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 1; Liquid
  • Amount concentration (molarity), mol/dm3 - 6; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25
  • POMD
  • 1
  • 5
  • 2
  • Amount concentration (molarity), mol/dm3 - 5 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 1; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25
  • POMD
  • 7
  • 3
  • 2
  • Amount concentration (molarity), mol/dm3 - 3 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 7; Liquid
  • Amount concentration (molarity), mol/dm3 - 3; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25
  • POMD
  • 7
  • 4
  • 2
  • Amount concentration (molarity), mol/dm3 - 4 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 7; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25
  • POMD
  • 7
  • 6
  • 2
  • Amount concentration (molarity), mol/dm3 - 6 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 7; Liquid
  • Amount concentration (molarity), mol/dm3 - 6; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25
  • POMD
  • 7
  • 5
  • 2
  • Amount concentration (molarity), mol/dm3 - 5 ; Gas
  • Temperature, K; Gas
  • Ratio of mass of solute to volume of solution, kg/m3 - 7; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Gas
  • Liquid
  • OTHER
  • 25