Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Thermodynamics of Ternary Liquid Mixtures Containing Toluene, Ethylbenzene, and Chlorobenzene

Kuus, M.[Mati], Kirss, H.[Helle], Siimer, E.[Enn], Kudryavtseva, L.[Ludmila]
J. Chem. Eng. Data 2003, 48, 4, 898-903
ABSTRACT
Excess molar enthalpy (HE) data and vapor-liquid equilibria (VLE) were measured for the ternary system toluene + ethylbenzene + chlorobenzene. Ternary HE values were measured with a Calvet-type microcalorimeter at 298.15 K. These results together with literature HE data of constituent binaries were used for a correlation with the modified Redlich-Kister equation. Boiling temperature (T)-liquid composition (x) relations were obtained at (26.66, 53.33, 79.99, and 101.32) kPa by using a semimicroebulliometer. The modified Wilson model with parameters that linearly depend on temperature was used to correlate the binary T-x data and to predict VLE in the ternary system. Excess functions at 298.15 K were compared.
Compounds
# Formula Name
1 C7H8 toluene
2 C8H10 ethylbenzene
3 C6H5Cl chlorobenzene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:4
  • 52
  • POMD
  • 1
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:4
  • 32
  • POMD
  • 2
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:4
  • 28
  • POMD
  • 2
  • 1
  • 3
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Calvet calorimetry
  • 27
  • POMD
  • 2
  • 1
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:4
  • 48