Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Excess Molar Enthalpies of Propyl Propanoate + 1-Hexanol + Benzene at the Temperatures of 25 :C and 35 :C

Casas, H.[Herminio], Jimenez de Llano, J.[Julieta], Garcia-Garabal, S.[Sandra], Segade, Luisa, Franjo, C.[Carlos], Jimenez, E.[Eulogio]
J. Chem. Eng. Data 2003, 48, 4, 763-767
ABSTRACT
As a part of our calorimetric studies we have measured the excess molar enthalpies of the ternary system {x1 propyl propanoate + x2 1-hexanol + (1-x1-x2) benzene} and of their corresponding binary mixtures at 25 :C and 35 :C and atmospheric pressure, over the whole composition range. The excess molar enthalpies were obtained by means of a Calvet microcalorimeter. The excess molar enthalpies for the binary mixtures were fitted to a Redlich-Kister variable-degree polynomial and the ternary excess molar enthalpies were adequately correlated by the Cibulka equation. The results obtained for the ternary mixture were used to test the empirical methods of Kohler, Jacob and Fitzner, Colinet, Tsao and Smith, Toop, Scatchard et al., and Hillert. These methods predict excess properties of the ternary mixtures from those of the involved binary mixtures.
Compounds
# Formula Name
1 C6H12O2 propyl propanoate
2 C6H14O hexan-1-ol
3 C6H6 benzene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:dT:0.01
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:dT:0.01
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:dT:0.01
  • 1
  • POMD
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:UFactor:2
  • 18
  • POMD
  • 3
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:UFactor:2
  • 18
  • POMD
  • 3
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:UFactor:2
  • 20
  • POMD
  • 3
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:UFactor:2
  • 52
  • POMD
  • 3
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:UFactor:4
  • 47
  • POMD
  • 3
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:dHEX1:1%:UFactor:4
  • 47
  • POMD
  • 3
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:UFactor:2:dHEX1:1%
  • 52