Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility, Density, and Viscosity Data for the KVO3 + Fe(VO3)3 + H2O System from (293.15 to 323.15) K

Mazurek, K.[Krzysztof], Druzynski, S.[Sebastian], Kielkowska, U.[Urszula], Wrobel-Kaszanek, A.[Adriana]
J. Chem. Eng. Data 2019, 64, 9, 4084-4094
ABSTRACT
The solubility of potassium vanadate(V) and iron(III) vanadate(V) in the system KVO3 + Fe(VO3)3 + H2O within a temperature range from (293.15 to 323.15) K was measured with the method of isothermal saturation of solutions. The total concentration of vanadium and iron ions in solutions was determined using the EDXRF method. The part of the polythermal solubility surface for the investigated system was plotted based on the obtained data. Additionally, the solution density and viscosity was investigated. Knowledge of these data is necessary to assess the possibility of selective precipitation of vanadium and iron compounds from a post leaching solution of the spent vanadium catalyst.
Compounds
# Formula Name
1 KO3V potassium vanadate
2 FeO9V3 iron(iii) vanadate
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 1
  • 3
  • Molality, mol/kg - 1 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal
  • spectroscopy
  • 37
  • POMD
  • 2
  • 1
  • 3
  • Molality, mol/kg - 1 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • spectroscopy
  • 29
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 62
  • POMD
  • 2
  • 1
  • 3
  • Kinematic viscosity, m2/s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 62
  • POMD
  • 2
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal
  • spectroscopy
  • 4
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 4
  • POMD
  • 2
  • 3
  • Kinematic viscosity, m2/s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 4
  • POMD
  • 1
  • 3
  • Molality, mol/kg - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • spectroscopy
  • 4
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 4
  • POMD
  • 1
  • 3
  • Kinematic viscosity, m2/s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 4