Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solid-Liquid Phase Equilibria in the Ternary Systems NaCl-ZnCl2-H2O and CaCl2-ZnCl2-H2O at 323 K

Zhang, X.-P.[Xue-Ping], Zhou, S.-Y.[Si-Yu], Mu, Y.-Y.[Yuan-Yuan]
J. Chem. Eng. Data 2019, 64, 10, 4330-4336
ABSTRACT
This paper describe the result of the solid-liquid equilibria phase diagram in the two ternary systems sodium chloride-zinc chloride-water and calcium chloride-zinc chloridewater at 323 K using the method of isothermal dissolution equilibrium. Integrated with the determined equilibrated liquid phase and humid residue composition, the phase diagrams of the two systems were generated. At the same time, the invariant points, the univariant solubility curves and the solid crystalline phase regions are displayed and discussed. The results of the experiment testify that the types of two ternary systems are classified as complex owing to the formation of double salt. The phase diagram of the ternary system NaCl-ZnCl2-H2O at 323 K is constituted of two eutectic points, three univariant solubility curves and three solid crystalline phase regions corresponding to NaCl, ZnCl2 and 2NaCl*ZnCl2. And the phase diagram of the ternary system CaCl2-ZnCl2-H2O at 323 K includes two eutectic points, three univariant solubility curves and three solid crystalline phase regions corresponding to CaCl2*2H2O, CaCl2*ZnCl2*2H2O and ZnCl2. The experimental densities of the equilibrium solution were measured using a density bottle method. Based on Laliberte model, the theoretical density of each saturated solution was calculated. The results show that the model giving worse prediction for two ternary systems with stronger interactions between components.
Compounds
# Formula Name
1 ClNa sodium chloride
2 CaCl2 calcium chloride
3 Cl2Zn zinc chloride
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 3
  • 4
  • Mass fraction - 1 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 6
  • POMD
  • 1
  • 3
  • 4
  • Mass fraction - 1 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Titration method
  • 7
  • POMD
  • 1
  • 3
  • 4
  • Mass fraction - 1 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 6
  • POMD
  • 1
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 3; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 17
  • POMD
  • 2
  • 3
  • 4
  • Mass fraction - 2 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Titration method
  • 6
  • POMD
  • 2
  • 3
  • 4
  • Mass fraction - 2 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • Titration method
  • 5
  • POMD
  • 2
  • 3
  • 4
  • Mass fraction - 2 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 6
  • POMD
  • 2
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 3; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 15
  • POMD
  • 1
  • 4
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 1
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • 4
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 1
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • 4
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Titration method
  • 1
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1