Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Influence of a-Olefin Concentration and Length on the High-Pressure Phase Behavior of (a-Olefin + n-Hexane + LLDPE) Systems

Swanepoel, R. M.[Riccardo M.], Schwarz, C. E.[Cara E.]
J. Chem. Eng. Data 2019, 64, 8, 3416-3435
ABSTRACT
Liquid to vapour-liquid, liquid-liquid to vapour-liquid-liquid, and liquid to liquid-liquid transition pressures of 789 + n-hexane + LLDPE) systems were measured using a newly constructed and verified synthetic-visual high-pressure cell and metallocene linear low-density polyethylene (LLDPE: w = 199 kg*mol , w n = 2.62, 2.56 mol% 1-hexene). New phase behaviour data are reported for: a quasibinary (n-hexane + LLDPE) system at polymer mass percentages of P P = (0.5 to 5) wt%; and quasiternary 789 = 3 wt% and polymer-free 89 + n-hexane + LLDPE) systems for mass percentages of up to 3 wt% ethylene, 20 wt% 1-butene, 100 wt% 1-hexene, 30 wt% 1-octene, and 30 wt% 1-decene. The reported data span temperatures of = (380 to 470) K and pressures of ! = (0.5 to 13) MPa. They show that (i) transition temperatures and pressures change linearly with 89 (ii) the C2 to C6 89 decrease, and the C8 to C10 89 mass fraction in the solvent; increase the transition temperatures; and (iii) ethylene has a significant antisolvency effect. The measured data are correlated and predicted successfully with the Modified Sanchez-Lacombe Equation of State.
Compounds
# Formula Name
1 C2H4 ethene
2 C20H42 eicosane
3 C4H8 1-butene
4 C6H14 hexane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 9
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 12
  • POMD
  • 1
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 12