Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility Measurement of the Systems MF2 (M = Ca, Mg, Zn) + ZnSO4 + H2O and MF2 (M = Ca, Mg) + ZnF2 + H2O at 298.15 K

Wang, S.[Shaoheng], Luo, Q.[Qiongqiong], Zhang, N.[Ning], Zeng, D.[Dewen]
J. Chem. Eng. Data 2019, 64, 7, 3078-3084
ABSTRACT
Solubility of sparingly soluble salts, i.e., CaF2(s), MgF2(s) and ZnF2(s) in ZnSO4 aqueous solution are necessary for the process design to remove Ca2+, Mg2+ and F- ions from zinc hydrometallurgical system. However, these data are unavailable in any literature up to now. In this work, the solubility of MF2(s) (M=Ca, Mg, Zn) in ZnSO4 and MF2(s) (M=Ca, Mg) in ZnF2 aqueous solutions have been elaborately measured at 298.15K. The results showed that the CaF2(s) and MgF2(s) solubility increase with the increasing ZnSO4 concentration, for example, their solubility in 2 mol*kg-1 ZnSO4 aqueous solution increase to about 6 times of that in pure water. The ZnSO4 plays slightly stronger salt-in effect on CaF2(s) than on MgF2(s). However, the ZnF2(s) solubility in ZnSO4 aqueous solution decreases at first and then increases with increasing ZnSO4 concentration. As expected, ZnF2 possess strong salting-out effect on the solubility of CaF2(s) and MgF2(s). A remarkable character is that the CaF2(s) solubility goes through a minimum point and then increases again with the ZnF2 addition, inverse, the MgF2(s) solubility decrease with the ZnF2 addition in all time. Their different solubility characters have been interpreted from the aspect of ion association interaction. An ion association model has been applied to predict the CaF2(s) and MgF2(s) solubility in ZnF2(s) aqueous solution. The predicted results agree with the experimental ones quite well, which indicates that the ion association dominates the excess properties of these concerned systems.
Compounds
# Formula Name
1 O4SZn zinc sulfate
2 F2Mg magnesium difluoride
3 CaF2 calcium fluoride
4 F2Zn zinc fluoride
5 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • 1
  • 5
  • Molality, mol/kg - 3 ; Liquid
  • Solvent: Molality, mol/kg - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • chemical analysis
  • 9
  • POMD
  • 2
  • 1
  • 5
  • Molality, mol/kg - 2 ; Liquid
  • Solvent: Molality, mol/kg - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • chemical analysis
  • 8
  • POMD
  • 4
  • 1
  • 5
  • Molality, mol/kg - 4 ; Liquid
  • Solvent: Molality, mol/kg - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • chemical analysis
  • 10
  • POMD
  • 3
  • 4
  • 5
  • Molality, mol/kg - 3 ; Liquid
  • Solvent: Molality, mol/kg - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • chemical analysis
  • 11
  • POMD
  • 3
  • 4
  • 5
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • chemical analysis
  • 1
  • POMD
  • 2
  • 4
  • 5
  • Molality, mol/kg - 2 ; Liquid
  • Solvent: Molality, mol/kg - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • chemical analysis
  • 10
  • POMD
  • 2
  • 4
  • 5
  • Molality, mol/kg - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • chemical analysis
  • 1
  • POMD
  • 3
  • 5
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • chemical analysis
  • 2
  • POMD
  • 2
  • 5
  • Molality, mol/kg - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • chemical analysis
  • 2
  • POMD
  • 4
  • 5
  • Molality, mol/kg - 4 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • chemical analysis
  • 1