Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Thermophysical and Molar Volume Aberration of Amphiphilic Eutectic Mix of Bivalent Diols and Ammonium-Ionic Liquid

Balaraman, H. B.[Harish Babu], Rathnasamy, S. K.[Senthil Kumar]
J. Chem. Eng. Data 2019, 64, 8, 3307-3315
ABSTRACT
The thermophysical delineation of four diol (Glycerol, 1, 2 Butane diol, 1, 6 Hexane diol, Ethane diol) based deep eutectic solvents (DES) were investigated in temperature range of 273 K to 323 K at atmospheric pressure. The homogenous mixture was prepared with quaternary ammonium salt and diols respectively at an identical molar ratio of 1:1 (HBA: HBD). Density and viscosity have negative response with increasing temperature. Conductivity and excess molar volume ratio increase at elevated temperature. The results obtained were correlated with linear model equations. Liquid-liquid equilibrium of ternary mixture formed with PEG (6000) + Na2CO3 + DES was measured and correlated with merchuk equation. It is inferred from the data that molecular weight and complex molecular nature of HBD have a positive influence on physicochemical properties of DES and its Biphasic separation.
Compounds
# Formula Name
1 C10H16ClN trimethylbenzylammonium chloride
2 CNa2O3 sodium carbonate
3 C4H10O2 1,2-butanediol
4 C6H14O2 1,6-hexanediol
5 C3H8O3 glycerol
6 C2H6O2 1,2-ethanediol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Crystal
  • Temperature, K; Crystal
  • Pressure, kPa; Crystal
  • Crystal
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Crystal
  • Temperature, K; Crystal
  • Pressure, kPa; Crystal
  • Crystal
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 1
  • 6
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 6
  • POMD
  • 1
  • 6
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 6
  • POMD
  • 1
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 1
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 6
  • POMD
  • 1
  • 5
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 6
  • POMD
  • 1
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 1
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 6
  • POMD
  • 1
  • 4
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 6
  • POMD
  • 1
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 6
  • POMD
  • 1
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 6
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7