Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility of l-Phosphinothricin and Its Hydrochloride in Water + (Methanol and Ethanol) Binary Solvent Mixtures from 278.15 to 318.15 K

Liu, Y.[Yayun], Meng, L.[Lijun], Yin, X.[Xinjian], Zhou, H.[Haisheng], Wu, J.[Jianping], Xu, G.[Gang], Yang, L.[Lirong]
J. Chem. Eng. Data 2019, 64, 7, 2955-2962
ABSTRACT
The solubility of L-phosphinothricin (L-PPT) and its hydrochloride in water + (methanol and ethanol) binary solvent mixtures was experimentally measured from 278.15 to 318.15 K by a static analytic method under atmospheric pressure. The experimental data showed that the solubility increased with the increasing temperature and decreased with the increase of alcohol concentration in binary solvent mixtures. The experimental data were correlated by the modified Apelblat equation and combined nearly ideal binary solvent/Redlich-Kister model. The results indicated that the modified Apelblat equation showed better agreement with the experimental data. The parameters characterizing preferential solvation of L-PPT in water + methanol binary solvents had been calculated. The results showed that the preferential solvation of L-PPT was related to the solvent composition and temperature.
Compounds
# Formula Name
1 C5H12NO4P (S)-phosphinothricin
2 CH4O methanol
3 H2O water
4 C2H6O ethanol
5 C5H13ClNO4P (S)-phosphinothricin hydrochloride
6 C9H11NO2 (.+-.)-phenylalanine
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 1 ; Liquid
  • Solvent: Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric
  • 63
  • POMD
  • 1
  • 4
  • 3
  • Mole fraction - 1 ; Liquid
  • Solvent: Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric
  • 63
  • POMD
  • 5
  • 2
  • 3
  • Mole fraction - 5 ; Liquid
  • Solvent: Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • gravimetric
  • 63
  • POMD
  • 5
  • 4
  • 3
  • Mole fraction - 5 ; Liquid
  • Solvent: Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • gravimetric
  • 54
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric
  • 9
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric
  • 9
  • POMD
  • 5
  • 3
  • Mole fraction - 5 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • gravimetric
  • 9
  • POMD
  • 5
  • 2
  • Mole fraction - 5 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • gravimetric
  • 9
  • POMD
  • 5
  • 4
  • Mole fraction - 5 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • gravimetric
  • 9
  • POMD
  • 6
  • 3
  • Molality, mol/kg - 6 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 6
  • gravimetric
  • 5