Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Experimental Determination and Modeling of Liquid-Liquid Equilibrium for Ternary Mixtures of Ethylene Glycol + 1,2-Butanediol + 3-Heptanone or Anisole

Li, Chunli, Wang, Xuefei, Li, Hao, Duan, Cong, An, Le, Liu, Qing
J. Chem. Eng. Data 2019, 64, 4, 1780-1790
ABSTRACT
Experimental liquid-liquid equilibrium (LLE) data for the system ethylene glycolEG+1, 2- butanediol (1,2-BD) + 3- heptanone were measured at atmospheric pressure at 293.15K, 303.15K and 313.15K and the ternary LLE for systems of EG + 1, 2-BD + anisole were also investigated at 303.15K at 101.3KPa by using liquid-liquid equilibrium kettle method. Distribution coefficient and selectivity were obtained and applied to evaluate the extraction capacity of 3- heptanone and anisole. The reliability of the experimental data was confirmed by the Hand correlation and the Othmer-Tobias correlation. The experimental LLE data were correlated by NRTL and UNIQUAC models, and the corresponding parameters were obtained. The root-mean-square deviations (RMSD) between the experimental data and calculated values were less than 1.22%. And topological concepts related to the Gibbs stability test were used to validate the consistency between model parameters and experimental data. The liquid-liquid equilibrium data provide the basic physicochemical properties for design of extraction process of 1,2-BD from EG by 3-heptanone and anisole. And according to integrated correlation coefficient analysis, 3- heptanone is more suitable for the extraction of 1, 2BD from EG than anisole.
Compounds
# Formula Name
1 C2H6O2 1,2-ethanediol
2 C4H10O2 1,2-butanediol
3 C7H14O 3-heptanone
4 C7H8O anisole
5 C7H8 toluene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 2 ; Liquid mixture 2
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 1 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Chromatography
  • Chromatography
  • Chromatography
  • 40
  • POMD
  • 1
  • 2
  • 4
  • Mole fraction - 1 ; Liquid mixture 2
  • Mole fraction - 1 ; Liquid mixture 1
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 2; Liquid mixture 2
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Chromatography
  • Chromatography
  • Chromatography
  • 11
  • POMD
  • 5
  • 1
  • Mole fraction - 5 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • 8
  • POMD
  • 5
  • 1
  • Mole fraction - 5 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 2
  • Liquid mixture 1
  • Chromatography
  • 8