Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solid Solubility in the Aqueous 2-Amino-2-methyl-propanol (AMP) Plus Piperazine (PZ) System

Neerup, R.[Randi], Sthl, K.[Kenny], Fosbl, P. L.[Philip L.]
J. Chem. Eng. Data 2019, 64, 6, 2423-2428
ABSTRACT
In this work the solid-liquid equilibrium (SLE) of the ternary system 2-amino-2-methyl-propanol (AMP)-piperazine (PZ)-H2O and the aqueous binary system AMP were determined using a freezing point depression (FPD) setup and differential scanning calorimetry (DCS). A total of 59 new data points are listed in the full concentration range of 0 less than w(AMP) less than 100 % and 0 less than w(PZ) less than 61 %. The SLE phase boundary of AMP tetrahydrate (AMP*4H2O) was determined and confirmed by its crystal structure obtained from powder x-ray diffraction (PXRD). The new data of this work can be used in the creation of thermodynamic model for prevention of AMP and PZ precipitates from solvents used for CO2 capture. This gives a higher degree of safe operation. These data will allow for a deeper understanding molecular interaction and bond lengths in the AMP-water system which can be used for molecular simulation.
Compounds
# Formula Name
1 C4H11NO 2-amino-2-methylpropan-1-ol
2 C4H10N2 piperazine
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Triple point temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • 3
  • Eutectic temperature, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Crystal of intercomponent compound 1
  • DTA
  • 1
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Large-sample thermal analysis
  • 15
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Large-sample thermal analysis
  • 14
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • Large-sample thermal analysis
  • 5
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Large-sample thermal analysis
  • 3
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Large-sample thermal analysis
  • 2
  • POMD
  • 1
  • 2
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Large-sample thermal analysis
  • 2
  • POMD
  • 1
  • 2
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Large-sample thermal analysis
  • 9
  • POMD
  • 1
  • 2
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • Large-sample thermal analysis
  • 2