Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Measurement and Correlation of the Solubility of Baicalin in Several Mixed Solvents

Wang, Haoji, Yao, Ganbing, Zhang, Haojian
J. Chem. Eng. Data 2019, 64, 3, 1281-1287
ABSTRACT
The baicalin was dissolved in four groups of mixed solvents consisting of organic solvents (methanol, ethanol, n-propanol and isopropanol) and water in different proportions with the temperature 278.15 - 318.15 K. The solubility of baicalin at the steady state of the system was measured by static technique under 101.1 kPa. Under the condition of constant temperature, the proportion of organic solvent increased and the solubility of baicalin increased accordingly; when the ratio of organic solvent was constant, the temperature increased and the mole fraction of baicalin also increased. In the case where the temperature and the ratio of the organic solvent were constant, the mixture of n-propanol and water had an advantage in dissolving baicalin. Besides, the solubility of baicalin was calculated by the Jouyban-Acree model, van t Hoff-Jouyban-Acree model and Apelblat-Jouyban-Acree model. The maximum value of RAD (average relative deviations) in all calculations was 1.63 %. It is noteworthy that the solubility data presented in this work contributes to providing the necessary physical and chemical information for the pharmaceutical industry to improve production and purification processes.
Compounds
# Formula Name
1 C21H18O11 baicalin
2 CH4O methanol
3 C2H6O ethanol
4 C3H8O propan-1-ol
5 C3H8O propan-2-ol
6 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 99
  • POMD
  • 1
  • 3
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 99
  • POMD
  • 1
  • 4
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 99
  • POMD
  • 1
  • 5
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 99
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 6
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 4
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 5
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9