Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Viscosity and Density of n-Alcohols at Temperatures between (298.15 and 323.15) K and Pressures up to 30 MPa

Pimentel-Rodas, Alfredo, Galicia-Luna, Luis A., Castro-Arellano, Jose J.
J. Chem. Eng. Data 2019, 64, 1, 324-336
ABSTRACT
Experimental data of dynamic viscosity () and density () of pure alcohols (1-butanol, 1pentanol, 1-heptanol, 1-octanol and 1-nonanol) are presented in the temperature range from (293.15 to 323.15) K and pressures up to 30 MPa. The data were obtained simultaneously, a capillary tube viscometer was used to measure the dynamic viscosity coupled with a vibrating tube densimeter where density is obtained. The expanded uncertainties ( = 2) of the reported data were estimated considering the impurities of the samples and are 0.90 % and 0.10 % for the dynamic viscosity and density measurements, respectively. Also, the dynamic viscosity and density data obtained in this study were modeled successfully as a function of pressure and temperature, through empirical equations previously published in literature. Finally, isothermal compressibilities and thermal isobaric expansivities were obtained using the density data set obtained.
Compounds
# Formula Name
1 C4H10O butan-1-ol
2 C5H12O pentan-1-ol
3 C7H16O heptan-1-ol
4 C8H18O octan-1-ol
5 C9H20O nonan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 48
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 48
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 48
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 48
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 48
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 48
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 48
  • POMD
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 48
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 48
  • POMD
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 48