Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Experimental Determination and Thermodynamic Modeling of Solid-Liquid Equilibria in the Quaternary System NaCl-KCl-SrCl2-H2O at 288.15 K

Meng, Lingzong, Wang, Xia, Li, Dan, Deng, Tianlong, Guo, Yafei, Yang, Lan
J. Chem. Eng. Data 2018, 63, 12, 4410-4417
ABSTRACT
The solubilities in quaternary system NaCl-KCl-SrCl2-H2O and its subsystem KCl-SrCl2-H2O at 288.15 K were investigated with the isothermal dissolution method. The phase diagram of the ternary system is composed of two single-salt crystallization for KCl and SrCl2*6H2O, two solubility univariant curves and one cosaturated point. The dry-salt diagram of the quaternary system consists of three single-salt crystallization fields for NaCl, KCl and SrCl2*6H2O, three solubility univariant curves and one invariant point. Combining the determined solubilities and Pitzer binary parameters obtained in the literature, the lacking Pitzer mixing parameters Na,Sr, K,Sr, Na,Sr,Cl, K,Sr,Cl and solubility product constants of solid salts for the systems were fitted on the basis of Pitzer model. The model was then used for calculating the solubilties of the two systems. The theoretical calculated results by model coincide with the experimental values.
Compounds
# Formula Name
1 ClNa sodium chloride
2 ClK potassium chloride
3 Cl2Sr strontium chloride
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 3
  • 4
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • multiple techniques
  • 7
  • POMD
  • 2
  • 3
  • 4
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • multiple techniques
  • 3
  • POMD
  • 2
  • 3
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • 3
  • 4
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • multiple techniques
  • 1
  • POMD
  • 1
  • 3
  • 4
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • multiple techniques
  • 1
  • POMD
  • 1
  • 3
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • 2
  • 4
  • Mass fraction - 2 ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • multiple techniques
  • 1
  • POMD
  • 1
  • 2
  • 4
  • Mass fraction - 2 ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • multiple techniques
  • 1
  • POMD
  • 1
  • 2
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • 4
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • multiple techniques
  • 1