Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Density, Speed of Sound, and Heat Capacity Measurements of Polyol Ester Lubricants

Fortin, Tara J.
J. Chem. Eng. Data 2018, 63, 12, 4325-4338
ABSTRACT
Densities, speeds of sound, and isobaric specific heat capacities were measured for three polyol ester base oils and one fully-qualified lubricant. Density and speed of sound were measured at ambient pressure over the combined temperature range 278.15 K to 343.15 K. Heat capacity was measured over the combined temperature range 263.14 K to 492.15 K; the specific temperature range varied for each fluid and was selected to avoid potential phase transitions. Measurement results for these three properties, as well as calculated adiabatic compressibilities, have been reported. Experimental results for the four fluids were compared with one another and with available literature data.
Compounds
# Formula Name
1 C25H44O8 pentaerythritol tetrapentanoate
2 C33H60O8 pentaerythritol tetraheptanoate
3 C41H76O8 pentaerythritol tetranonanoate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 14
  • POMD
  • 1
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • Single path-length method
  • 14
  • POMD
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • DSC
  • 170
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 14
  • POMD
  • 2
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • Single path-length method
  • 14
  • POMD
  • 2
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • DSC
  • 124
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13
  • POMD
  • 3
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • Single path-length method
  • 13
  • POMD
  • 3
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • DSC
  • 100