Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Refractive Index and Vapor-Liquid Equilibrium Data for the Binary Systems of Anisole with Xylene Isomers at 93.13 kPa

Yadav, Satyajeet S., Mali, Nilesh A., Joshi, Sunil S.
J. Chem. Eng. Data 2018, 63, 9, 3475-3481
ABSTRACT
Refractive index and binary vapor-liquid equilibrium (VLE) data for anisole with xylene isomers (p-xylene, m-xylene, o-xylene & ethylbenzene) was measured at a constant pressure of 93.13 kPa by using a dynamic recirculation still. The applicability of the experimental VLE data for process modeling applications was tested with Herington, Van Ness and absolute mean deviation consistency test and the data was found acceptable. The experimental VLE data were correlated using the Wilson, NRTL and UNIQUAC activity coefficient models and binary interactions parameters were estimated using an objective function of minimizing the difference between experimental and model estimated values of vapor phase composition and total pressure. No azeotropic behavior was observed in any of the binary pairs and appears easy to separate using conventional distillation method.
Compounds
# Formula Name
1 C7H8O anisole
2 C8H10 1,4-dimethylbenzene
3 C8H10 1,3-dimethylbenzene
4 C8H10 1,2-dimethylbenzene
5 C8H10 ethylbenzene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 5
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 13
  • POMD
  • 2
  • 1
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Index of refraction calibration data
  • 13
  • POMD
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 17
  • POMD
  • 3
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 13
  • POMD
  • 3
  • 1
  • Mole fraction - 3 ; Gas
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Index of refraction calibration data
  • 13
  • POMD
  • 3
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 16
  • POMD
  • 4
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 13
  • POMD
  • 4
  • 1
  • Mole fraction - 4 ; Gas
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Index of refraction calibration data
  • 13
  • POMD
  • 4
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 14
  • POMD
  • 5
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 13
  • POMD
  • 5
  • 1
  • Mole fraction - 5 ; Gas
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Index of refraction calibration data
  • 13
  • POMD
  • 5
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 18