Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Heat Capacity of R1234ze(E) at Temperatures from 313 to 393 K and Pressures up to 10 MPa

Liu, Yu, Zhao, Xiaoming, He, Hanwei, Wang, Rui
J. Chem. Eng. Data 2018, 63, 1, 113-118
ABSTRACT
Isobaric heat capacities of R1234ze(E) were investigated by using a modified flow calorimeter covering a temperature range of (313 to 393) K and pressures up to 10 MPa. The uncertainties in measurement of the heat capacity were estimated to be less than 0.01 at temperatures below 373 K, rising to 0.02 in the near critical region (373 K and 393 K). An empirical equation was developed for correlation on the basis of the experimental data. In addition, a comparison was made between the present data and literature values.
Compounds
# Formula Name
1 C3H2F4 trans-1,3,3,3-tetrafluoropropene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 130