Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Measurement and Correlation of Isobaric Vapor Liquid Equilibrium for Binary Systems of 1-(Ethoxymethoxy)-2-methyl-propane with Isobutyl Alcohol or 1-Butanol at 101.33 kPa

Song, Y.-H.[Yu-He], Wang, S.-E.[Shu-E], Hua, H.[Hui], Song, J.[Juan], Wei, P.-H.[Ping-He], Li, C.-F.[Cun-Fu]
J. Chem. Eng. Data 2017, 62, 8, 2443-2449
ABSTRACT
Experimental vapor liquid equilibrium (VLE) data for binary systems of 1-(ethoxymethoxy)-2-methyl-propane (EMMP) with isobutyl alcohol and 1-butanol at 101.33 kPa was measured. The measurements of saturated vapor pressure for EMMP were also measured. The experiment was performed by an improved Rose still. A minimum boiling azeotrope was found about the binary system containing 1-butanol for which the azeotropic temperature and composition are 389.64 K and 75.92 mol% (1-butanol) at 101.33 kPa. The VLE measurements were correlated by the Wilson, nonrandom two-liquid, and universal quasichemical models for which the results showed that the measurements had a good correlation by using three models about two binary systems, respectively. The thermodynamic consistency of the VLE measurements was checked by the traditional area test and the direct test methods.
Compounds
# Formula Name
1 C4H10O 2-methyl-1-propanol
2 C4H10O butan-1-ol
3 C7H16O2 1-(ethoxymethoxy)-2-methylpropane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 13
  • POMD
  • 1
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 22
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 22
  • POMD
  • 2
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 20
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 20