Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isobaric Vapor Liquid Equilibrium for the Binary Systems Dimethyl Disulfide + C1 C4 n-Alkanol at 40.000 and 101.325 kPa

Mahdoui, N. B.[Najla Ben], Artigas, H.[Hector], Lafuente, C.[Carlos], Hichri, M.[Monia], Khattech, I.[Ismail]
J. Chem. Eng. Data 2017, 62, 7, 2037-2043
ABSTRACT
The vapor liquid equilibrium (VLE) data for the binary mixtures dimethyl disulfide + methanol, dimethyl disulfide + ethanol, dimethyl disulfide + 1-propanol, and dimethyl disulfide + 1-butanol have been measured over the complete composition range at p = 40 and 101.325 kPa using a Fischer Labodest ebulliometer. All of the considered binary systems exhibit azeotropic points. The study of the effect of pressure upon the azeotropic composition shows that an increase in the number of carbons in the n-alkanol induces the composition of the azeotropic point to move toward the dimethyl disulfide-rich region. Our experimental data were correlated by the Wilson equation and checked for thermodynamic consistency. The reduced excess Gibbs function was also calculated, and the values of this property are discussed in terms of molecular interactions. Moreover, our experimental VLE data were compared with those calculated with the modified UNIFAC model with unsatisfactory results.
Compounds
# Formula Name
1 C2H6S2 2,3-dithiabutane
2 CH4O methanol
3 C2H6O ethanol
4 C3H8O propan-1-ol
5 C4H10O butan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 5
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 1
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 38
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Density calibration data
  • 38
  • POMD
  • 1
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 44
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Density calibration data
  • 44
  • POMD
  • 1
  • 4
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 39
  • POMD
  • 1
  • 4
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Density calibration data
  • 39
  • POMD
  • 1
  • 5
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 41
  • POMD
  • 1
  • 5
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Density calibration data
  • 41