Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Thermal and Volumetric Properties of Some C5 and C6 Alkanones at Infinite Dilution in Water

Dohnal, V.[Vladimir], Rehak, K.[Karel], Moravek, P.[Pavel]
J. Chem. Eng. Data 2017, 62, 5, 1659-1666
ABSTRACT
Precise measurements of excess enthalpies and densities of highly dilute aqueous solutions of five C5-C6 alkanones (namely 2-pentanone, 3-pentanone, 3-methyl-2-butanone, 2-hexanone, and 4-methyl-2-pentanone) were carried out using tandem flow mixing calorimetry and vibrating-tube densimetry. The experimental data obtained in the temperature range from (288.15 to 318.15) K were utilized for the evaluation of limiting partial molar excess enthalpies, partial molar volumes, and partial molar excess volumes of the alkanones in water. Within the temperature range studied, these infinite dilution properties were found to exhibit linear trends. As inferred from respective linear fits, partial molar excess heat capacities, partial molar expansions, and excess partial molar expansions were obtained with a good accuracy. Moreover, hydration enthalpies and heat capacities of the alkanones studied were evaluated, too. The thermodynamic behavior of the alkanone solutes was discussed in terms of molecular interactions and shown to be closely correlated with that for equistructured alkanol solutes.
Compounds
# Formula Name
1 C5H10O pentan-2-one
2 C5H10O pentan-3-one
3 C5H10O 3-methyl-2-butanone
4 C6H12O 2-hexanone
5 C6H12O 4-methylpentan-2-one
6 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 4
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 4
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 4
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 4
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 4
  • POMD
  • 1
  • 6
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 41
  • POMD
  • 1
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 42
  • POMD
  • 2
  • 6
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 48
  • POMD
  • 2
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 48
  • POMD
  • 3
  • 6
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 47
  • POMD
  • 3
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 47
  • POMD
  • 4
  • 6
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 36
  • POMD
  • 4
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 36
  • POMD
  • 5
  • 6
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 46
  • POMD
  • 5
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 45