Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubilities of Diethyl Phthalate, Dicyclopentadiene, and Styrene in Ionic Liquid 1-Ethyl-3-methylimidazolium Acetate

Zhang, K.[Kai], Cui, X.[Xianbao], Feng, T.[Tianyang], Zhang, Y.[Ying], Liu, H.[Haofei]
J. Chem. Eng. Data 2017, 62, 2, 857-863
ABSTRACT
Solubilities of diethyl phthalate (DEP), dicyclopentadiene (DCPD), and styrene in ionic liquid 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) were measured in the temperature range T = (283.15 353.15) K and at atmospheric pressure (101.3 kPa) the corresponding temperature composition phase diagrams were obtained. Solubilities of DEP and DCPD in [Emim][OAc] increase with temperature but the solubility of styrene in [Emim][OAc] decreases with temperature. The ternary liquid liquid equilibrium data for the system of styrene + glycerol + [Emim][OAc] were also determined at temperatures of 298.15, 308.15, 318.15, and 328.15 K, and the results indicate that the addition of glycerol can significantly reduce the solubility of styrene in [Emim][OAc]. For the ternary system, when the amount of glycerol is enough, the solubility of styrene in [Emim][OAc] increases with temperature. The experimental data were correlated by the nonrandom two-liquid activity coefficient model and the binary interaction parameters were obtained.
Compounds
# Formula Name
1 C12H14O4 diethyl phthalate
2 C10H12 3a,4,7,7a-tetrahydro-4,7-methanoindene
3 C8H8 styrene
4 C3H8O3 glycerol
5 C8H14N2O2 1-ethyl-3-methylimidazolium acetate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 9
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 4
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 9
  • POMD
  • 1
  • 5
  • Mole fraction - 1 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • 15
  • POMD
  • 2
  • 5
  • Mole fraction - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • 10
  • POMD
  • 3
  • 5
  • Mole fraction - 3 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • 13
  • POMD
  • 4
  • 3
  • 5
  • Mole fraction - 3 ; Liquid mixture 2
  • Mole fraction - 3 ; Liquid mixture 1
  • Mole fraction - 4 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mole fraction - 4; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 2
  • Liquid mixture 1
  • Chromatography
  • Chromatography
  • Chromatography
  • 24