Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor Liquid Equilibrium and Physicochemical Properties of Novel Aqueous Blends of (2-Diethylaminoethanol + Piperazine) for CO2 Appropriation

Adak, S., Kundu, M.
J. Chem. Eng. Data 2017, 62, 7, 1937-1947
ABSTRACT
Equilibrium solubility of CO2 in aqueous blends of 0.23 mol/kg piperazine (PZ) + 0.92 mol/kg 2-diethylaminoethanol (DEAE), 0.52 mol/kg PZ + 2.08 mol/kg DEAE, 0.92 mol/kg PZ + 3.68 mol/kg DEAE, and 1.49 mol/kg PZ + 5.96 mol/kg DEAE in the low pressure region of 0.1 65 kPa and at temperatures of 303.15 323.15 K is reported in the present article. A thermodynamic model is developed, which correlates the experimentally generated data on CO2 solubility in the newly proposed blend with an excellent agreement. Density and viscosity of DEAE + PZ + H2O have been measured at temperatures of 303.1 323.1 K and total amine mass percentage in all the blends are kept constant at 0.3. The mass % ratios of PZ/DEAE considered for measurements were 3:27, 6:24, 9:21, and 12:18. pKa of aqueous DEAE solution are reported in 298.15 333.15 K temperature range. Generated density data are correlated using Redlich Kister equation, Grunberg and Nissan, and Gonzalez-Olmos, and Iglesias type models and viscosity data are correlated using Grunberg and Nissan model.
Compounds
# Formula Name
1 C6H15NO (diethylamino)ethanol
2 C4H10N2 piperazine
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 9
  • POMD
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 9
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 20
  • POMD
  • 1
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 20