Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Thermodynamic Data for Processing Naphthol with Supercritical Carbon Dioxide

Trupej, N.[Nina], Skerget, M.[Mojca], Petek, O.[Otilija], Cor, D.[Darija], Knez, Z.[Zeljko]
J. Chem. Eng. Data 2017, 62, 4, 1223-1231
ABSTRACT
The solubilities of 1-naphthol and 2-naphthol in CO2 have been investigated at the temperatures 313, 333, and 353 K in the pressure range from 10 to 60 MPa. The melting points in the presence of CO2 have been determined at pressures from 10 to 60 MPa. The densities of the systems 1-naphthol/CO2 and 2-naphthol/CO2 were determined at temperatures of 313, 333, and 353 K and at pressures up to 40 MPa by a densitometer. The solubility decreases with increasing temperature above the pressure of 20 MPa and has a maximum. The melting points of naphthols decrease with increasing pressure to a melting point minimal temperature at pressure 20 MPa. The density of the naphthols/CO2 solution can differ from the density of the pure CO2 (below the critical point also by 100% or more).
Compounds
# Formula Name
1 CO2 carbon dioxide
2 C10H8O 1-naphthol
3 C10H8O 2-hydroxynaphthalene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS
  • 1
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 2
  • 1
  • Mole fraction - 2 ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 2
  • GRAVIMETRIC
  • 20
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 2
  • Vibrating tube method
  • 43
  • POMD
  • 2
  • 1
  • Vapor or sublimation pressure, kPa ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 2
  • Liquid
  • visual
  • 10
  • POMD
  • 1
  • 3
  • Mole fraction - 3 ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 3
  • GRAVIMETRIC
  • 17
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 3
  • Vibrating tube method
  • 33
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 1
  • Liquid
  • visual
  • 10