Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Effect of Structural Variations on the Thermophysical Properties of Protic Ionic Liquids: Insights from Experimental and Computational Studies

Khan, Amir Sada, Man, Zakaria, Bustam, Mohamad Azmi, Gonfa, Girma, Chong, Fai Kait, Ullah, Zahoor, Nasrullah, Asma, Sarwono, Ariyanti, Ahmad, Pervaiz, Muhammad, Nawshad
J. Chem. Eng. Data 2017, 62, 10, 2993-3003
ABSTRACT
In this work, new protic ionic liquids (PILs) based on 1-methylimidazolium/1- propyronitrileimidazolium cations with hydrogensulfate, methanesulfonate, trifluoromethanesulfonat, paratoluenesulfonate, trifluoroacetate, and acetate anions were synthesized. The structures and purity of the products were confirmed by using 1H and 13C NMR and CHNS elemental analysis. The effect of structural variations on the thermophysical properties, namely, refractive index, density and viscosity was evaluated in a wide temperature range. The viscosity and density values were measured within the temperature range of 293.15-373.15 K. The density values were used further to calculate more properties like thermal expansion coefficient, molecular volume, standard entropy and the lattice energy. Moreover, the experimental values of viscosity were used for calculation of activation energy. Refractive indices were measured within the temperature range of 293.15- 323.15 K, and these values were also used in the calculation of electronic polarizability. Acid number of the prepared PILs were measured and correlated with their structure moiety. In addition, the density functional theory (DFT) calculations were performed to get a deeper insight into the effect of structural variations of the ion pairs on their physical properties.
Compounds
# Formula Name
1 C4H8N2O4S 1-methylimidazolium hydrogen sulfate
2 C6H9N3O4S 1-(2-cyanoethyl)imidazolium hydrogen sulfate
3 C7H11N3O3S 1-(2-cyanoethyl)imidazolium methanesulfonate
4 C7H8F3N3O3S 1-(2-cyanoethyl)imidazolium trifluoromethanesulfonate
5 C13H15N3O3S 1-(2-cyanoethyl)imidazolium 4-methylbenzenesulfonate
6 C8H11N3O2 1-(2-cyanoethyl)imidazolium acetate
7 C8H8F3N3O2 1-(2-cyanoethyl)imidazolium trifluoroacetate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 1
  • Triple point temperature, K ; Glass
  • Glass
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 2
  • Triple point temperature, K ; Glass
  • Glass
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 9
  • POMD
  • 3
  • Triple point temperature, K ; Glass
  • Glass
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 4
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 5
  • Triple point temperature, K ; Glass
  • Glass
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 8
  • POMD
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 8
  • POMD
  • 6
  • Triple point temperature, K ; Glass
  • Glass
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 6
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 9
  • POMD
  • 7
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1