Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Effect of Pressure on the Azeotrope of the Mixture Isoamyl Acetate Isoamyl Alcohol at 50.00, 101.32, 250.00, and 350.00 kPa

Rojas, O.[Oscar], Salazar, A.[Andres], Gil, I.[Ivan], Rodriguez, G.[Gerardo]
J. Chem. Eng. Data 2016, 61, 9, 3109-3115
ABSTRACT
In this work the phase equilibrium data for the mixture isoamyl acetate (iAAc) + isoamyl alcohol (iAA) at pressures of 50.00, 101.32, 250.00, and 350.00 kPa in a dynamic recirculation cell (Fischer Labodest VLE model 602) were measured. The existence of a minimum boiling point azeotrope and the effect of the pressure on the azeotropic composition were determined. The data obtained experimentally were evaluated by means of a thermodynamic consistency analysis to validate the data quality and to use it in data regression to obtain the adjusted aij parameters for the nonrandom two-liquid (NRTL) model at each system pressure. Finally, a pressure swing distillation separation scheme is proposed. The main operating conditions of this separation alternative are defined by simulations in the Aspen Plus software platform in order to obtain high-purity components.
Compounds
# Formula Name
1 C7H14O2 3-methylbutyl ethanoate
2 C5H12O 3-methylbutan-1-ol
3 C2H6O ethanol
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 14
  • POMD
  • 2
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 14
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 60
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Gas
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 60
  • POMD
  • 3
  • 4
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 15
  • POMD
  • 3
  • 4
  • Mole fraction - 3 ; Gas
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 15