Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isobaric Phase Equilibrium of tert-Butyl Alcohol + Glycerol at Local and Subatmospheric Pressures, Volumetric Properties, and Molar Refractivity from 303.15 to 333.15 K of tert-Butyl Alcohol + Glycerol, tert-Butyl Alcohol + Water, and Water + Glycerol Binary Systems

Aniya, V.[Vineet], De, D.[Debiparna], Singh, A.[Ashish], Bankupalli, S.[Satyavathi]
J. Chem. Eng. Data 2016, 61, 5, 1850-1863
ABSTRACT
Isobaric vapor liquid equilibrium for the binary system of tert-butyl alcohol (TBA) + glycerol were obtained at local atmospheric pressure of 95.9 kPa and subatmospheric pressures of 66.6 and 79.9 kPa over the entire composition range using a modified Othmer-type ebulliometer. Wilson and NRTL models were used for correlating the experimental data. The results suggest that the NRTL model represented the experimental data better with lower RMSD and AAD values. Furthermore, at local atmospheric pressure of 95.9 kPa, the densities and refractive indices for the three binary systems TBA + glycerol, TBA + water, and water + glycerol involved in the dehydration of TBA by extractive distillation were measured over the entire composition range from 303.15 to 333.15 K. The volumetric properties in terms of excess molar volume, partial molar volume, and isobaric thermal expansivities as well as molar refractivity were evaluated and analyzed for the three different binary systems. A Redlich Kister polynomial was used to the fit the excess molar volume and deviations in molar refractivity. Different empirical mixing relations were also investigated for predicting the refractive indices of the three binary mixtures and are reported in terms of their average percentage deviation.
Compounds
# Formula Name
1 C4H10O 2-methylpropan-2-ol
2 H2O water
3 C3H8O3 glycerol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 3
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 3
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 7
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • chromatography and titration
  • 63
  • POMD
  • 3
  • 1
  • Boiling temperature at pressure P, K ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Gas
  • Gas
  • Liquid
  • Ebulliometric method (Recirculating still)
  • 63
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 147
  • POMD
  • 3
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 147
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 161
  • POMD
  • 1
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 161
  • POMD
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 175
  • POMD
  • 3
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 175