Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Measurements of Vapor Pressure and Saturated Liquid Density for HFO-1234ze(E) and HFO-1234ze(Z)

Katsuyuki, T.[Tanaka]
J. Chem. Eng. Data 2016, 61, 4, 1645-1648
ABSTRACT
Vapor pressure and saturated liquid density for HFO 1234ze(E) and HFO 1234ze(Z) were measured in the temperature range from 300 K to 400 K by using the extraction method. Experimental uncertainties are estimated to be 0.028 K for temperature, 0.4 kPa for pressure and 0.9 kg*m-3 for density. Vapor pressures were obtained in the pressure range from 526 kPa to 3462 kPa for HFO 1234ze(E) and from 185 kPa to 2309 kPa for HFO 1234ze(Z). Saturated liquid densities were obtained in the density range from 670 kg*m-3 to 1158 kg*m-3 for HFO 1234ze(E) and from 843 kg*m-3 to 1220 kg*m-3 for HFO 1234ze(Z). These data are compared with the existing equations of state.
Compounds
# Formula Name
1 C3H2F4 trans-1,3,3,3-tetrafluoropropene
2 C3H2F4 (Z)-1,3,3,3-tetrafluoro-1-propene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 18
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Pycnometric method
  • 18
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 22
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Pycnometric method
  • 22